For transporting heavy, coarse or contaminating materials, a standard conveyor is not always sufficient. Waste streams, recycling materials and other bulk materials place high demands on the conveyor belt, its construction and the way the material is fed onto and discharged from the conveyor. Jansen Conveyors develops and builds robust rubber belt conveyors tailored to the application. We consider not only the required length and width of the conveyor, but above all the material to be transported and the conditions under which the conveyor will operate. How heavy is the material? How large are the individual pieces? How much material needs to be transported per hour? From what height does the material fall onto the belt? Is the material dry, wet, contaminating or abrasive? Does the conveyor need to incline or decline? Based on these factors, we design a conveyor that matches both the material and the installation in which it will be used.
Discuss your applicationRubber belt conveyors are widely used for the continuous transport of bulk materials and material flows that are heavy, coarse or contaminating. Typical examples include waste and recycling streams, wood, metal parts, construction and demolition waste and other loose industrial materials.
Rubber belts are wear-resistant and robust and can be combined with a heavy-duty steel frame construction. This also makes them suitable for longer conveying distances and larger belt widths.
For lighter products or applications where hygiene, easy cleaning or quick belt replacement is particularly important, a PU, PVC or plastic modular belt conveyor may be a better solution. The material being transported therefore plays an important role in determining the most suitable type of conveyor.
Typical applications:
Waste & recycling | Wood | Metal parts | Construction & demolition waste | Bulk materials | Industrial material flows
When transporting loose materials, it is important to keep the material on the conveyor as effectively as possible. Our rubber belt conveyors can therefore be designed as troughed belt conveyors.
With a troughed belt conveyor, angled carrying rollers guide the rubber belt into a trough shape. As a result, the material is not simply carried on top of the belt, but partially contained within it. This allows larger volumes of loose material to be transported while reducing the risk of material spilling over the sides of the belt.
The rollers also provide rolling support for the belt, making this design particularly suitable for longer conveying distances and larger material flows.
The weight a conveyor needs to carry is not the only important factor. The way in which the material is loaded onto the belt also has a major influence on the conveyor design.
When heavy pieces of material fall onto a rubber belt from a height, the loading point is subjected to a significant impact each time. Without the correct support, this can lead to accelerated wear or damage to the belt and the underlying structure.
Special impact sections can therefore be incorporated at these locations. The frame can be reinforced locally, while impact rollers, impact bars or an impact bed can be installed underneath the belt. These absorb a significant part of the impact from falling material and support the belt at the point where the load is greatest.
Impact section for heavy loads
Impact rollers | Impact bars | Impact bed
The most suitable solution depends on factors including the weight of the material, the size of the individual pieces and the height from which the material falls onto the belt
When transporting waste, recycling materials and other loose bulk materials, material can fall beside or underneath the conveyor. This not only causes contamination around the installation but can also result in additional maintenance and downtime.
We therefore consider the complete material flow during the design process: from the way the material is loaded onto the belt to the point at which it is discharged.
The troughed shape of the belt helps keep the material towards the centre of the conveyor. Additional guides and sealing solutions can be installed around loading and transfer points to minimise material loss.
When transporting waste and contaminating, wet or sticky materials, material can remain attached to the surface of the rubber belt. As the belt travels along the return side of the conveyor, this material can subsequently fall underneath the entire conveyor.
Effective belt cleaning is therefore an important part of a rubber belt conveyor system.
A belt scraper can be installed at the discharge end to remove residual material before the belt starts its return run. The scraper can be spring-loaded against the belt, helping it maintain contact even as the scraper wears.
A cleaner return belt means less material underneath the conveyor, less contamination around rollers and drums, and less manual cleaning.
Material can also enter the inside of the returning belt. If this material is carried along with the belt, it can eventually become trapped between the rubber belt and a return or drive drum.
To prevent this, a V-plough scraper can be installed on the inside of the conveyor belt. Its V-shape directs loose material towards the sides of the belt before it can reach a drum.
The V-plough scraper therefore serves a different purpose from the belt scraper on the product side. Its main function is to keep the inside of the conveyor clean and help prevent loose material from becoming trapped between the belt and the drums.
A V-plough scraper can be incorporated when required by the material being transported and the application.
A conveyor system is built for many years of operation, while production or recycling processes may change over time. Our rubber belt conveyors can therefore be built using a modular construction.
The frame can consist of individual sections that are connected to each other. This creates a strong structure while retaining the flexibility to modify the conveyor system at a later stage.
We use standard modules of up to 3 metres. This makes it possible, for example, to extend or shorten a conveyor at a later stage if the installation or production process changes.
Reliable belt tracking is important for long conveyors and heavy material flows. The rubber belt must have sufficient grip on the drive drum and remain as centred as possible throughout the conveyor.
The drive drum can therefore be designed with a slight crown, which supports correct belt tracking and helps keep the rubber belt centred. Rubber lagging with a diamond pattern provides additional grip between the drive drum and the rubber belt and helps prevent slippage.
The drive system, drum diameters, rollers and selected belt type are matched to factors including the length and width of the conveyor, the weight of the material being transported, the required capacity and the angle of inclination.
A heavy-duty conveyor must not only be strong, but also remain practical when maintenance is required.
During the design process, we therefore consider accessibility to components including rollers, scrapers, drums, bearings and the drive system. Accessible moving parts are guarded where required, while the guards are designed to allow maintenance work to be carried out practically.
Guards around accessible return rollers, for example, can be designed so that they can be removed for maintenance.
There is no single standard rubber belt conveyor suitable for every material flow. A good conveyor design therefore starts with the material that needs to be transported.
To determine the right configuration, we consider factors including:
Type of material | Bulk density | Piece size | Required capacity | Belt width | Conveying length | Incline angle | Infeed and drop height | Contaminating | Wet | Sticky | Abrasive
Based on this information, we determine the frame construction, rubber belt, belt width, drive system, rollers, impact sections, scrapers and any additional side guides.
You do not need to know in advance exactly which type of conveyor you require. Tell us what you need to transport, how much material needs to be handled and what the installation looks like. Based on this information, we can determine together which conveying solution best suits your process.